Abrasive Belts

Product Details:

Product Benefits:

• High stability and low stretch due to polyester backing
• High stock removal rates in the coarse grit range
• Very constant surface quality in the fine grit range
• Universal use for dry or wet grinding (resistant to water, emulsion, and oil)

Applications:

• Surface grinding on stationary belt and wide belt grinding machines of coils and sheets out of stainless steel, titanium, and other non-ferrous metals. Also recommended for sanding wood, plastic, and composite materials
• Centerless grinding of tubes, rollers, and cylinders on stationary belt grinding machines
• Edge grinding and chamfering of glass panels for the automotive and construction industries, hollow glass and ceramics

Other Details:

Product Details:

Product Benefits:

• Consistent surface finishes
• High form stability
• Antistatic treatment means reduced dust on workpiece and sanding machine

Applications:

• Calibrating and intermediate and fine sanding of wood-based panels
• Sanding of MDF-, HDF-, OSB-boards and Particle boards, cementboards, gypsum plaster board and
• HPL-laminates
• Can be delivered as an unsegmented wide belt, belt width < 1600 mm

Other Details:

Additional Information:

• Item Code: RB-374-Z

Product Details:

Product Benefits:

•     Agressive and high grinding performance and stock removal through novel mixtured zirconia alumina grain
•     Low grinding temperature due to the additional Procut coating
•     Flexible cotton cloth backing guarantees a high adaptability to contours

Applications:

•     High-performance grinding of stainless steel and high alloyed steel
•     High-performance grinding of contoured workpieces
•     Economical grinding of forgings, blanks and castings

Product Details:

Product Benefits:

• Cork polishing disc for producing brilliant and fine-structured surfaces
• Can be used for dry and wet grinding (resistant to water, emulsion, and oil)
• Highly tear-resistant polyester backing for high belt tension

Applications:

• Centerless grinding of workpieces such as tubes, rollers and cylinders on stationary belt grinding machines for producing very bright or “mirror-finished” surfaces
• Flat grinding on stationary belt and wide belt grinding machines of stainless steel coils/sheets for producing very bright so-called “Brush-Finish” on metallic surfaces
• Polishing of flat glass edges and fibers

Other Details:

Additional Information:

• Item Code: Cork-RB-515-Y

Product Details:

Product Benefits:

• Cork polishing disc for producing brilliant and fine-structured surfaces
• Can be used for dry and wet grinding (resistant to water, emulsion and oil)

Applications:

• Centreless grinding of workpieces such as tubes, rollers and cylinders on stationary belt grinding machines for producing very bright or “mirror-finished” surfaces
• Flat grinding on stationary belt and wide belt grinding machines of stainless steel coils/sheets for producing very bright so-called “Brush-Finish” on metallic surfaces
• Polishing of flat glass edges and fibres

Other Details:

Product Details:

Product Benefits:

• Consistent surface finishes
• High form stability
• Antistatic treatment means reduced dust on workpiece and sanding machine

Applications:

• Calibrating and intermediate and fine sanding of wood-based panels
• Sanding of MDF-, HDF-, OSB-boards and Particle boards, cementboards, gypsom plaster board and HPL-laminates
• Can be delivered as a segmented wide belt, belt width > 1600 mm

Other Details:

Additional Information:

• Item Code: RB-374-90-ZZ

Product Details:

Product Benefits:

• Highly economical due to low overall grinding costs
• Hard and sharp ceramic grain provides high stock removal rate and long tool life
• Very good grit adhesion even at high grinding pressure in the center as well as on the edges
• Stiff, highly tear-resistant and waterproof Z-Polyester backing assures an optimal belt stability

Applications:

• High-performance grinding of all metals, especially corrosion- and acid-resistant stainless steels, tool steels, Ni- and Co-based alloys, titanium
• Economical grinding of forgings, blanks and castings
• Suitable for grinding operations with high pressure
• Recommended for use with cooling lubricants

Other Details:

Product Details:

Product Benefits:

• Three-dimensional MERCURIT grain structure means 3-5 times longer tool life and thus greater economy and productivity compared to conventional grinding belts (shorter machine setup times, lower material and disposal costs)
• Consistent roughness values and stock removal rate throughout the whole of service life result in a high degree of process stability
• Especially suitable for wet-grinding applications at moderate to high grinding pressures

Applications:

• Cylindrical and flat grinding on stationary belt and wide belt machines
• Cylindrical grinding: for intermediate and fine grinding of tubes and rods, ideal supplement to Hermes MERCURIT RB 598 Y
• Flat grinding: Machining square tubular materials
• Machining of workpieces made of stainless steel

Other Details:

Product Details:

Product Benefits:

• Highly tear-resistant and waterproof Polyester backing with low elongation provides high belt stability
• Tough zirconia alumina grain provides high stock removal rates and long tool life
• High stability and low stretch due to polyester backing
• Low grinding temperature due to the additional Procut coating
• Especially suitable for dry grinding of stainless steel
• Universal use for dry and wet grinding (resistant to water, emulsion, and oil)

Applications:

• Flat grinding of steel and stainless steel coils and sheets
• Centreless grinding of tubes, rollers, and bars on stationary belt grinding machines
• Deburring of stampings out of steel and stainless steel and castings out of aluminium and out of other non-ferrous metals on stationary grinding machines or hand-held belt grinders

Other Details:

Additional Information:

• Item Code: RB-486-44-Z

Product Details:

Product Benefits:

• Highly economical due to low overall grinding costs
• Tough and sharp ceramic grain provides high stock removal rates and long tool life
• Low grinding temperature due to the additional Procut coating
• Highly tear-resistant and waterproof Polyester backing with low elongation provides high belt stability

Applications:

• Grinding of all metals, especially corrosion- and acid-resistant stainless steels, titanium, Ni- and Co-based alloys
• Deburring of sharp-edged castings and stampings out of stainless steel, tool steel, titanium, nickel and chromium-cobalt-based alloys on stationary or hand-held grinding machines
• Centerless grinding of tubes, rollers, and bars on stationary grinding machines
• Recommended for dry applications and low grinding pressures

Other Details:

Additional Information:

• Item Code: CR-456-Z

Product Details:

Product Benefits:

• Highly economical due to low overall grinding costs
• Tough and sharp ceramic grain provides high stock removal rates and long tool life
• Low grinding temperature due to the additional Procut coating
• Highly tear-resistant and waterproof Polyester backing with low elongation provides high belt stability

Applications:

• Grinding of all metals, especially corrosion- and acid-resistant stainless steels, titanium, Ni- and Co-based alloys
• Deburring of sharp-edged castings and stampings out of stainless steel, tool steel, titanium, nickel and chromiumcobalt-based alloys on stationary or hand-held grinding machines
• Centerless grinding of tubes, rollers and bars on stationary grinding machines
• Recommended for use with cooling lubricants and low grinding pressures

Other Details:

Product Details:

Product Benefits:

• Produces the HERMESIT finish with the matt HERMESIT bright effect
• Three-dimensional HERMESIT grain structure means 3-5 times longer tool life and thus greater economy and productivity compared to conventional grinding belts (shorter machine setup times, lower material and disposal costs)
• High degree of process stability due to consistent roughness values and stock removal rates throughout the whole tool life
• Low grinding temperatures reduce surface changes during grinding
• Especially suitable for applications at low grinding pressure
• Non-segmented wide belts up to 63″ wide are available
• Can be universally used for dry and wet-grinding (resistant to emulsion and oil)

Applications:

• Flat and cylindrical grinding on stationary belt and wide belt machines
• Decorative finish grinding on coil/sheet made of steel, stainless steel, and high-alloy steels
• Intermediate and fine grinding of tubes and rods made of stainless steel, high-alloy steels and non-ferrous
• metals

Other Details:

Product Details:

 The ProBoard®- wide sanding belt product family are especially developed for sanding particle board, MDF, HDF, chipboard and fibreboard and offers exceptional productbenefits:

• Abrasive grain – Additional to the hard and high-quality silicon carbide grain the chip space geometry, especially adapted to the application, and a modified resin bonding system ensures long tool life and a perfect surface quality.

• Backing – Depending to the application, the ProBoard® product family includes special backing types (paper, paper/cloth combination, cloth or stitch bonded cloth) which are completed with optimized belt joint constructions.

• Antistatic – The antistatic construction of the backing and bonding systems prevent a eletrostatic loading of the belt and a premature clogging with sanding dust.

Segmented Belts are used in calibration, intermediate sanding and finish sanding of Panel Boards such as Particle, MDF, HDF and OSB.

We offer belts with width ranging from 6 mm upto 3200 mm, we provide industries shortest lead time of 2-3 weeks for dispatching your orders; which is less than half the lead time compared to 10 weeks committed by competitors, thus we help you get more competitive by reducing your inventory carrying costs.

 

Additional Information:

• Production Capacity: 10000
• Delivery Time: 15 days

Product Details:

Owing to the expertise of our skilled and experienced professionals, we are able to offer an extensive range of Abrasive Belts which are designed according to set industry standards. These belts are manufactured from superior grade raw material with the help of advanced technology. Further, these belts are available in aluminum oxide, silicon carbide, zircon, and ceramic. The unique bond system used in the electrocoating of these belts ensures that the belts withstand severe applications. The offered belts are used in various industries for operations ranging from heavy stock removal to fine finishing.

Features:

• Smooth finish
• Accurate dimensions
• Durability

Request
Callback

Additional Information:

• Item Code: EmeryBelt
• Production Capacity: 100000
• Delivery Time: 2 Weeks
• Packaging Details: 100 Nos

Product Details:

Product Benefits:

• Highly economical due to low overall grinding costs
• Ductile and sharp ceramic abrasive grain provides high stock removal rates
• Low grinding temperature due to the additional Procut coating
• Flexible cotton cloth backing guarantees a high adaptability to contours

Applications:

• High-performance grinding of contoured workpieces
• Deburring of sharp-edged castings and stampings out of stainless steel and tool steel on stationary or hand-held grinding machines
• Suitable for automatic or manual grinding

Other Details:

Product Details:

Product Benefits:

• Highly economical due to low overall grinding costs
• High stock removal and sufficient economic costs provides by tough and sharp ceramic grain
• Low grinding temperature due to the additional Procut coating
• Flexible cotton backing for grinding edges and radii

Applications:

• High-performance grinding of contoured workpieces
• Deburring of sharp-edged castings and stampings out of stainless steel, tool steel, titanium, nickel and chromium-cobalt-based alloys on stationary or hand-held grinding machines
• Recommended for robot and hand-held grinding applications

Other Details:

Product Details:

Product Benefits:

• Produces the HERMESIT finish with the brilliant HERMESIT bright effect
• Three-dimensional HERMESIT grain structure means 3-5 times longer tool life and thus greater economy and productivity compared to conventional grinding belts (shorter machine setup times, lower material and disposal costs)
• Consistent roughness values and stock removal rate throughout the whole of service life result in a high degree of process stability
• Low grinding temperatures reduce surface changes during grinding
• Non-segmented wide belts up to 61″ wide are available
• Especially firm backing means this product can also be used as a segmented wide belt (belt width > 61″)
• Can be universally used for dry and wet-grinding (resistant to emulsion and oil)

Applications:

• Cylindrical and flat grinding on stationary belt and wide belt machines
• Preliminary grinding (e.g. removing scale) to decorative finish grinding on coil/sheet and tubes and rods made of steel, stainless steel, high-alloy steels and titanium

Other Details:

Product Details:

Product Benefits:

• Produces the HERMESIT finish with the matt HERMESIT bright effect
• Three-dimensional HERMESIT grain structure means 3-5 times longer tool life and thus greater economy and productivity compared to conventional grinding belts (shorter machine setup times, lower material and disposal costs)
• High degree of process stability due to consistent roughness values and stock removal rates throughout the whole tool life
• Low grinding temperatures reduce surface changes during grinding
• Special pressure-resistant HERMESIT grain makes this product especially suitable for applications at medium to high grinding pressures
• Non-segmented wide belts up to 1,550 mm wide are available
• Especially firm backing means this product can also be used as a segmented wide belt (belt width > 1,550 mm)
• Can be universally used for dry and wet-grinding (resistant to emulsion and oil)

Applications:

• Cylindrical and flat grinding on stationary belt and wide belt machines
• Preliminary grinding (e.g. removing scale) to decorative finish grinding on coil/sheet and tubes and rods made of steel, stainless steel, high-alloy steels and titanium

Other Details:

Product Details:

Product Benefits:

• Three-dimensional MERCURIT grain structure means 3-5 times longer tool life and thus greater economy and productivity compared to conventional grinding belts (shorter machine setup times, lower material and disposal costs)
• Consistent roughness values and stock removal rate throughout the whole of service life result in a high degree of process stability
• Even, low level of stock removal with a simultaneous polishing effect
• Silicon carbide abrasive grain produces a brilliantly bright surface
• Especially suitable for wet-grinding applications at moderate to high grinding pressures

Applications:

• Cylindrical and flat grinding on stationary belt and wide belt machines
• Flat grinding: Machining square tubular materials
• Machining workpieces made of carbon steel (e.g. prior to chrome-plating) and stainless steel

Other Details:

Product Details:

Product Benefits:

• Three-dimensional HERMESIT grain structure means 3-5 times longer tool life and thus greater economy and productivity compared to conventional grinding belts (shorter machine setup times, lower material and disposal costs)
• Consistent roughness values and stock removal rate throughout the whole of service life result in a high degree of process stability
• Especially suitable for applications at low grinding pressure
• Flexible cloth backing means very good adaptability to workpiece contours

Applications:

• Shaping on stationary portable belt grinders or with automatic workpiece guidance
• Shaping of forged and cast metal components
• Only suitable for dry-grinding

Other Details:

Product Details:

Product Benefits:

• Produces the HERMESIT finish with the brilliant HERMESIT bright effect
• Three-dimensional HERMESIT grain structure means 3-5 times longer tool life and thus greater economy and productivity compared to conventional grinding belts (shorter machine setup times, lower material and disposal costs)
• Consistent roughness values and stock removal rate throughout the whole of service life result in a high degree of process stability
• Low grinding temperatures reduce surface changes during grinding
• Non-segmented wide belts up to 63″ mm wide are available
• Can be universally used for dry and wet-grinding (resistant to emulsion and oil)

Applications:

• Flat and cylindrical grinding on stationary belt and wide belt grinding machines
• Decorative finish grinding on coil/sheet made of steel, stainless steel, high-alloy steels and titanium
• Intermediate and fine grinding of tubes and rods made of stainless steel, high-alloy steels and non-ferrous
• metals
• Fine grinding of flat and hollow glass edges

Other Details:

Product Details:

Product Benefits:

• Synthetic resin bond ensures excellent grit adhesion
• Good stock removal rate

Applications:

• Universally applicable on hand-held machines

Other Details:

Product Details:

Product Benefits:

• Highly economical due to low overall grinding costs
• Hard and sharp ceramic grain provides high stock removal rate and long tool life
• Very good grit adhesion even at high grinding pressure in the center as well as on the edges
• Stiff, highly tear-resistant and waterproof Z-Polyester backing assures an optimal belt stability
• Additional Procut-Coating for “cool” grinding

Applications:

• High-performance grinding of all metals, especially corrosion- and acid-resistant stainless steels and tool steels
• Economical grinding of forgings, blanks, and castings
• Recommended for dry applications
• Suitable for grinding operations with high pressure

Other Details:

Product Details:

Product Benefits:

• Cork polishing belt for producing bright-matt and fine-structured surfaces
• Can be used for dry and wet grinding (resistant to water, emulsion, and oil)

Applications:

• Flat grinding on stationary belt and wide belt grinding machines of stainless steel coils/sheets for producing very bright surfaces

Other Details:

Product Details:

Product Benefits:

• Highly adaptable to contours and radii
• Very good edge-restoring force means extended grinding belt life
• Very good grit adhesion
• Suitable for grinding by robots and machines

Applications:

• Profile grinding with belts on automatic and off-hand machines with manual workpiece transportation
• Suitable for grinding shapes, outlines, profiles and radii
• Grinding of brass, tool steel, zinc castings, aluminum alloys, stainless steel

Other Details:

Product Details:

Product Benefits:

• Highly adaptable to contours and radii
• Very good edge-restoring force means extended grinding belt life
• Very good grit adhesion
• Additional Procut coating for cool grinding
• Suitable for grinding by robots and machines

Applications:

• Especially suitable for grinding workpieces (e.g. fittings) out of lead-free brass or difficult to grind metals
• Profil grinding with belts on automatic and off-hand machines with manual workpiece transportation
• Suitable for grinding shapes, outlines, profiles and radii

Other Details:

Product Details:

Product Benefits:

• Excellent adaptability to contoured workpieces and radii
• High stock removal rates together with high surface quality

Applications:

• Automatic or manual grinding of taps, fittings and fixtures
• Grinding of radii, edges and areas with semi-hard to smooth contact rolls
• Grinding and deburring of turbine blades

 

Other Details:

Product Details:

Product Benefits:

• High stock removal rates for long belt life
• Consistent surface finishes for the whole sanding period
• Improved dust control in the work area
• Open coat resists premature loading

Applications:

• Intermediate and finish sanding on both soft and hard kinds of wood
• Calibrating of wood

Other Details:

Additional Information:

• Item Code: RB-316-36-Z-op

Product Details:

Product Benefits:

• High stability and low stretch due to polyester backing
• High stock removal rates in the coarse grit range
• Very constant surface quality in the fine grit range
• Universal use for dry or wet grinding (resistant to water, emulsion, and oil)

Applications:

• Surface grinding on stationary belt and wide belt grinding machines of coils and sheets out of stainless steel, titanium, and other non-ferrous metals. Also recommended for sanding wood, plastic, and composite materials
• Centerless grinding of tubes, rollers, and cylinders on stationary belt grinding machines
• Edge grinding and chamfering of glass panels for the automotive and construction industries, hollow glass and ceramics

Other Details:

Product Details:

Product Benefits:

• Closed coating for long tool life
• Stable, tear-resistant F-weight paper backing allows sanding with high sanding pressure (calibrating sanding)

Applications:

• Economic, mechanical surface sanding of wooden materials
• Especially suitable for sanding hardwoods (solid wood)
• Standard product for grinding of stainless steel sheets

Other Details:

Product Details:

Product Benefits:

• High stock removal rates especially on stainless steel and high-alloyed steel
• Very long tool life especially on hard wood
• Low grinding temperatures
• Uniform surface pattern without staining

Applications:

• Flat grinding of thick and press plates out of stainless steel and high-alloyed steel on stroke grinding and wide belt grinding machines
• Flat sanding of doors and window frames out of hard wood on stroke and wide belt sanding machines

Other Details:

Product Details:

Product Benefits:

• High-performance aluminum oxide abrasive grain means longer tool life
• Coating with active ingredient Procut prevents workpiece surface overheating
• Less distortion especially when grinding thin stainless steel sheets (thickness: < 1 mm)

 

Applications:

• Mechanical finish grinding of stainless steel sheets and coils with long belt and wide belt grinding machines
• Decorative surface grinding of metal housings for example in equipment and vessels construction

Other Details:

Product Details:

As one of the renowned organizations of this domain, we are engaged in offering the best in a class assortment of High-performance Very Tough Abrasive Paper. The offered range is manufactured using optimum quality raw-material and advanced technology. As per the requirement of our clients, we provide the entire range in various sizes and shapes. Offered at market leading price, this paper meets the specific requirements of our valued clients.

Features:

• Easy usage
• Best quality
• Flawlessness

Product Benefits:

• High stock removal rates for long belt life
• Consistent surface finishes for the whole sanding period
• Improved dust control in the work area
• Open coat resists premature loading

Applications:

• Coarse, intermediate and finish sanding of hardwoods, veneered panels and solid wooden parts
• Suitable for hardwood (Beech, Oak, Birch, Poplar, Elder, Tropical hardwood, Elm, Walnut, Hickory White ash, Maple)

Other Details:

Product Details:

Owing to our experience and knowledge in this domain, we are engaged in offering a supreme quality of Very Stable And Strong Silicon Carbide Abrasive Paper. It is used for Finishing and super finishing of coils and sheets out of stainless steel. This paper is manufactured using high grade raw-material and progressive technology in compliance with the set industry standards. Offered paper is highly acclaimed among clients for its fine finish, optimum quality and durability. The offered paper is checked by our experts against various parameters of quality.

Features:

• Webrax-MSG is particularly suitable for generating bright-effect stainless steel surfaces
• Very fine surface pattern
• Shape of work piece is not changed
• Back of belt is smooth, so can be used on grinding machines with a pad
• Strong cloth backing increases occupational safety during grinding

Product Benefits:

• Hard silicon carbide grain guarantees long tool life and perfect finish quality
• Antistatic additives prevent premature clogging with sanding dust
• Suitable for fine sanding MDF and Chipboard
• Very stable, strong paper backing

Applications:

• Intermediate and fine sanding of MDF-, HDF-, OSB-boards and Particle boards, cementboards, gypsom plaster board and HPL-laminates

Other Details:
Type    17900
Grit range    P 60 – P 180

Additional Information:

• Item Code: BS-179

Product Details:

Being a customer oriented firm, we are engaged in offering a wide range of Waterproof And Stable Silicon Carbide Abrasive Paper. This paper is manufactured using optimum grade raw-material and sophisticated technology in synchronization with industry standards. In order to ensure quality, the entire range is rigorously tested on various parameters by quality controllers. It is used for sanding of lacquer and filler as well as repair sanding of top layers. Keeping in mind the diverse requirements of our clients, we provide entire range in various sizes and specifications and at an affordable price.

Features:

• Smooth finish
• Best quality
• Durability

Product Benefits:

• Stable Latex paper backing with improved characteristics of flexibility, resistance to folding and tearing
• Can be used wet or dry

Applications:

• Sanding of lacquer and filler as well as repair sanding of top layers
• Metallography industries
• Finish of rotogravure rollers
• Fine sanding in the clock and jewelry industry
• Lacquer sanding of shaped wood parts

Other Details:
Type    61810
Grit range    P 60 – 1200, + 2500

Product Details:

With a desire to cement our reputation in the market, we are engaged in offering an excellent range of Heavy Abrasive Paper With Zirconia Alumina Grain. Keeping in mind current market development, this paper is manufactured by our qualified professionals employing premium quality raw-material and modernize tools. Apart from this, our quality experts perform a series of test on the entire range ensuring its flawlessness.

Features:

• Industry approved design
• Tear resistance
• High durability

Product Benefits:

• The outstanding feature of BW 184 is the considerably superior tearing resistance of the G-weight paper compared to lighter and conventional paper abrasive belts
• Considerable cost advantages for repair grinding on deburred workpieces in comparison with cloth abrasive belts

Applications:

• Calibration sanding of solid wood boards
• Repair grinding of sheets and plates

Other Details:
Type    18400
Grit range    + 24, + 40, + 60, + 80

Additional Information:

• Item Code: BW-184

Product Details:

We are one of the trusted organizations, known to offer an exquisite range of Highly Rigid Grinding Paper. This paper is manufactured using optimum grade raw material and cutting edge technology in synchronization with set industry norms of quality. It is widely used for flat grinding on stationary belt and wide belt machines. Apart from this, this paper is extensively demanded in the market for their indispensable features. Clients can avail the entire range from us at an affordable price.

Features:

• Consistent roughness values and stock removal rate throughout the whole of service life result in a high degree of process stability
• Plain paper backing for a consistent surface
• Non-segmented wide belts up to 61″ wide are available

Product Benefits:

• Three-dimensional MERCURIT grain structure means 3-5 times longer tool life and thus greater economy and productivity compared to conventional grinding belts (shorter machine setup times, lower material and disposal costs)
• Consistent roughness values and stock removal rate throughout the whole of service life result in a high degree of process stability
• Plain paper backing for a consistent surface
• Non-segmented wide belts up to 61″ wide are available

Applications:

• Flat grinding on stationary belt and wide belt machines
• Decorative finish grinding on coil/sheet made of steel, stainless steel
• For dry grinding only

Other Details:
Type    59010
Grit range    P 180, P 240, P 320, P 400, P 600

Additional Information:

• Item Code: MERCURIT-BW-590

Product Details:

In line with clients' variegated requirements, we bring forth a distinguished collection of Short Stub E Highly Rigid Grinding Paper. This paper is designed at our ultra-modern manufacturing unit using the superb quality raw-material and progressive technology in conformance with defined quality standards. Being a quality-oriented organization, we assure our clients that this paper is excellent on counts of durability and quality. It is used for flat grinding on stationary belt and wide belt grinding machines.

Features:

• Sturdiness
• Non corrosive
• Durability 

Product Benefits:

• Three-dimensional HERMESIT grain structure means 3-5 times longer tool life and thus greater economy and productivity compared to conventional grinding belts (shorter machine setup times, lower material and disposal costs)
• Produces the HERMESIT finish with the brilliant HERMESIT bright effect
• High degree of process stability due to consistent roughness values and stock removal rates throughout the whole tool life
• Low grinding temperatures reduce surface changes during grinding
• Especially suitable for applications with low grinding pressure
• Non-segmented wide belts up to 61″ wide are available

Applications:

• Flat grinding on stationary belt and wide belt grinding machines
• Decorative finish grinding on coil/sheet made of steel, stainless steel, high-alloy steels
• For dry grinding only

Other Details:

Additional Information:

• Item Code: HERMESIT-BS-540

Product Details:

Our firm specializes in offering an excellent collection of Stable Abrasive Paper that can be used on long and wide belt grinding machines. This paper is manufactured using topmost grade raw-material and sophisticated technology in conformity with the certified industry norms. In order to deliver the defect free range at clients' end, this paper is checked against the various parameters of quality before supply set by industry.
 
Features:

• Webrax-MSG is particularly suitable for generating bright-effect stainless steel surfaces
• Very soft, elastic, voluminous Abrasive web which adapts well to shapes and contours
• Very fine surface pattern
• Shape of work piece is not changed
• Back of belt is smooth, so can be used on grinding machines with a pad

Product Benefits:

• Stearate coating prevents premature loading with sanding dust
• Antistatic structure of product allows dust-free working
• Flexible D-weight paper backing for “soft” sanding of lacquer
• Good sanding result on transparent lacquer systems

Applications:

• Lacquer- and intermediate sanding

Other Details:

Product Details:

We are a significant organization in this domain, engaged in offering a vast range of Stable Abrasive Paper With Silicon Carbide. It is used for matting metallic surfaces, aluminum, copper and brass work pieces. Offered paper is manufactured using optimum quality raw material and latest technology by our skilled professionals. We provide this paper at very competitive price to our clients. Besides, this paper is made available in various sizes and shapes. This paper is highly appreciated among our clients for its precise design and durability.

Features:

• Compact, intensive-grinding Abrasive web
• High stock removal
• Very fine and consistent surface pattern
• Especially suitable for generating a satin-effect stainless steel surface
• Universal application

Product Benefits:

• Antistatic structure of product allows dust-free working
• Flexible D-weight paper backing for soft sanding of lacquer
• Good sanding result on transparent lacquer systems

Applications:

• Lacquer- and intermediate sanding

Other Details:

Additional Information:

• Item Code: BS-119